Jump to content
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble

Recommended Posts

Lots of you may like it or you may not? Lol, i have had several proteges, 323, 626`s and 1 mx6, ive worked on all of them several atx to mtx swaps, to say the least i know my mazdas from a geographical stand point of the cars, i started noticing working in the automotive mechanics field, that they are all very similiar in engineering design, this got my imagination flowing of possibilities, there are many dead end forum post for escorts and proteges, on 5lug and brake conversions, 626, mx6, and probe, do not run into these deadends as commonly, so here is the story.

I reluctantly bought a 95 escort station wagon for way to much, blah blah blah, i hated the car it was ugly it was slow and boring, but it ran good and drove from point a to b, woohoo!!!!, i had the racers itch that i had to scratch so i took it to auto x, had lots of fun, the next year it was time for upgrades, ebay everything, lowering springs, racing clutch, struts, short throw shifter and craigslist rims and tires. It killed it the car was finally something i liked and loved, i wore out the clutch, second gear syncro, and the engine was just getting tired, so i bought a 96 ford probe gt 5 speed car, for $200, it ran good but was in horrible condition, i stripped the probe of all nuts bolts and running and suspension gear, and threw away the carcass, so i have gotten pretty far into this build and i apoligize for lack of pictures on alot of specific stuff, but i will answer as many ?? That you all may have, so what i did was removed the front and rear sub frames, from the scort, drilled new holes in the scort and bolted up both front and rear sub frames from the probe, 5lug conversion and rear disc brake upgrade complete. Front brakes are from 2004 mazda 6, standard information to us here at mazda626.net for front brake upgrade, i know that i could have used mx3 parts to make this easier, but im a glutten for punishment, i adapted the steering linkage from rack to column using the scort column, with a little triming the probe cluster fit in the dash, looking decent, i have to modify the probe xmember and adapt the passenger side engine mount bracket, the benefit is 3" wider track all around, heavier equipment, for the engine to bolt to, also i didnt have to search for a mx3 GS, im overwhelmed with wiring and i need a starting point, anyone got any input?










Share this post

Link to post
Share on other sites

I've installed the probe harness from the front to the drivers seat, both fuse panels, ecu, I need to adapt hvac controls, steering column, and rear chassis harness, to the probe harness, if anyone can sticky a OBD2 harness and connector views that would be awesome, 





Share this post

Link to post
Share on other sites

Thank you everyone here's some more pics, thank you to the moderator that made posting pics way easier, So what I've done recently is lowered the front, mounted the engine and transmission, waiting on t-belt and w/p kit, valve covers gaskets and grommets, headers, I made a passenger side engine mount bracket, just tacked together, my friend has a proper welder, I will take it there, I need a cat, I'm running factory obd2 ecm calibrations, so i need it so the computer doesnt freak out, smog I think is coming soon, lol 95 car so they just sniff it, and visual inspection, I cut a section out of the probe x member, front core support to front sub frame, I need to plate it off and cut new holes to mount it to core support, I figure the more of the probe parts I make work, the better the car will be for me, I'm using the probe radiator, and fan setup, I have to mount the corners of the rad tanks in the inside corners of the headlamps, I think it's B/A!!! It is a rat car to me, scavenge and scrape to get it going,









Share this post

Link to post
Share on other sites
On 6/20/2017 at 4:09 PM, FIS said:

While you're doing all this work, you should consider doing a "MAF" swap. Here is a nice guide:

It is not necessary for my project, i wish i had klg4 instead, i tried the atx ecu on a manual car on my 1st atx to mtx swap, i ordered the right ecm as fast as i could i had idle issues and stuff,  it didn't like to drop rpms it was finicky, MS is a direction i would be more interested in, get rid of the maf all together and run map, C.O.P etc. The distributor and t-belt are my nemesis, or at least where in the past with my MX-6, the best mod a did to that was delete the cat, but the 1 it had was burnt up, but once it could breathe it sounded better, it accelerated better, the last t-belt pulley you put on is a MF!!! I dont know if i fxxxed it up?? Because i bought that car with a broken belt, and also the engine i have now had a similiar issue starting in the threads on the left bank head, the pulley boss hole it gets started at an angle if your not careful, then the pulley mounts crooked, and it throws belts. I inserted a m10x1.25 helicoil in mine i hope it is the remedy. I wanted to timesert in the boss but the tool kit is expensive, timesert would definitely be the repair to go with in my opinion. Timing belt water pump and valve cover gaskets today. Im still searching for wiring diagrams, everything from the engine bay to dash is all probe. All fuse blocks are probe, steering column is escort and all the wiring harness from the driver seat back is escort stn wagon, the hvac controls are escort.

Share this post

Link to post
Share on other sites

There is tons of manuals over at www.PMX626.info, not quite sure how much Probe manuals/diagrams there is but the MX-6/626 is pretty identical on the wiring.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now