Jump to content

FS KL Gasket sets, fuel sender, cheap

Recommended Posts

I have two Eristic gasket sets for the 2.5L.  One set is complete, with MLS head gaskets, square runner intake gaskets, exhaust gaskets, valve cover gaskets and grommets, and what looks to be a thermostat housing gasket.  It also has the front and rear main oil seals, the upper and lower oil pan/block gaskets, and a bunch of other engine gaskets.


The other kit has MLS head gaskets, exhaust gaskets, and just the front valve cover gasket, and a few misc o-rings.


One complete kit costs over $100, check around for yourself.

Should work for 93-02 V6 models, including the 626, MX6, and Millenia, although the intake gaskets are specific to square runner manifolds.

I will take $80 shipped for all of it.


Link to post
Share on other sites

Also for sale is the fuel tank sending unit, complete with misc. hardware and hoses, tank gasket, fuel pump mount, and wiring.  I believe this is from a '93 MX-6, but I don't know for certain.  It may very well be identical in many Mazdas, I don't know off-hand.  Was a clean Florida car, and there is no rust.  I hate to throw it away, but shipping isn't free either.  $30 shipped by itself, or I can include it to whomever buys the gasket set for an additional $5.

If someone buys all of this, I will throw in a few random goodies I still have laying around for free.  I have an eBay polished AFPR (adjustable fuel pressure regulator), worked great but the pressure gauge failed (leaks internally) and needs to be replaced (you could also just cap the port after you've set your fuel pressure).  I also saw a front swaybar bushing bracket.  If I find any more Mazda parts I have no use for (the only Mazda I have left is the 2.0L FS Protege5) I'll throw them in as well.


You guys will probably cry to hear that I scrapped a perfectly good V6 manual transmission with only 100k miles for a measly $15 the last time I had to clean out my garage (I was moving, didn't have time to find a buyer).  Don't let good parts go to waste!


Paypal or check accepted (but you will have to wait for the check to clear before I ship anything).

Link to post
Share on other sites
  • 2 weeks later...
  • Create New...