Jump to content

Recommended Posts

This friday i replaced my rear left abs sensor.

Since it ohmed out above 1.46kOhm, and got a rear left code in abs computer.

Got an new one (same part number), unplugged battery terminals. Removed old one and installed new one. (Did reset abs computer after hooking everything up)

Problem is after driving arou d for a day my tcs & tcs off lights just randomly come on.

Jumperd the abs pin  (in dlc) & negative.

Pulled codes 14 -17 -82 from abs computer, abs seems to work fine however, another thing is when i jump the terminal and negative lead and then switch to on and press brake pedal i can hear and feel the abs pump working.


Pulled a maf low input code from cars ecu (p0102) ( no loss of power or whatso ever, screened the maf sensor reading and speed - load and rpm data will try to look to post this later on).

Looking to replace all vacuum hoses in a  few weeks.   Can anyone tell me which sizes and how much lines/hoses i will need to get ?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...