Jump to content

1980 626 Sedan 2.0 Exhaust/extractors


Recommended Posts

Hi, I recently purchased a 1980 Mazda 626 and I've been chasing an exhaust and extractors.
I don't know if I'm just not searching in the right places but I cant find anything and I'm close to just buying the pipe and bends and making it all myself hah.
Can anyone help?

Cheers
 

Link to post
Share on other sites

Don't look for Mazda headers - look for Ford Courier ones.  At least then you can modify the engine pipe to suit.

These guys are here in sunny Melbourne. :smile:

 

HTH019 :thumbsup:

http://www.hitechheaders.com.au/catalogue/ford/4

  • Like 1
Link to post
Share on other sites

Don't look for Mazda headers - look for Ford Courier ones.  At least then you can modify the engine pipe to suit.

These guys are here in sunny Melbourne. :smile:

 

HTH019 :thumbsup:

http://www.hitechheaders.com.au/catalogue/ford/4

Awesome thanks :smile: , Also is there a way to check if i have round or square port heads using the engine number?

I'm unsure if the HTH054 is like the factory header or actual extractors. I have messaged aN eBay user that stock the item. They cant supply a picture of the item  :(

Link to post
Share on other sites

Unfortunately, you are going to have to release the exhaust manifold and have a squizzy!  :thumbsup:

The HTH054 and HTH055 are definitely extractors. 

 

I hope you have round ports because I know Hitech sold their last set of HTH055s to another forum member back in 2013.

Fingers crossed they may have made more since then.

 

Redback also make headers as well - top of page 27.

http://redbackperformance.com.au/pdf/redback-performance-headers.pdf

 

Let me know if you get stuck finding an exhaust shop over there who sells Redback systems.  Pretty sure I can track a few down here on the mainland for you. :biggrin:

Link to post
Share on other sites

Unfortunately, you are going to have to release the exhaust manifold and have a squizzy!  :thumbsup:

The HTH054 and HTH055 are definitely extractors. 

 

I hope you have round ports because I know Hitech sold their last set of HTH055s to another forum member back in 2013.

Fingers crossed they may have made more since then.

 

Redback also make headers as well - top of page 27.

http://redbackperformance.com.au/pdf/redback-performance-headers.pdf

 

Let me know if you get stuck finding an exhaust shop over there who sells Redback systems.  Pretty sure I can track a few down here on the mainland for you. :biggrin:

I found some diagrams on the internet of the different headers, and I noticed that the square header port headers go 4 into 1 and the round port goes 4 into 2.

Only noticed it because of the gasket between haha  :biggrin: 

I remembered that mine was the dual so I have ordered the HTH054s. 

I'll buy some pipe and bends to make a complete 2'' system, and I'll post back when I receive the headers and fit them.

Thanks again !  :smile: 

Link to post
Share on other sites
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...