Search the Community
Showing results for tags 'brake bleeding'.
Found 1 result
Hey. Im new here. This past summer i bought an 02 626 ES. i have been doing all my own repair. And now i need new brake pads. I went to do it today but im having troubles. i found the little allen screw behind the bolt for releasing the piston. i was turning it and it turned fairly easy but the piston never retracted. and when i pulled the allen wrench out, the hex screw came out too, only it wasnt a screw. it doesnt have threads, it has a gear on the end. but the teeth were mashed up a little. i took it to the grinder and ground it back to where it wasnt mashed anymore, then tried retracting the piston again. but the gear mashed up again. is that hex gear screw supposed to come out? and would i be able to spray inside the hole with penetrating oil? or would i need a new caliper? and if so what is a good caliper to get without spending tons of money? Thanks. I really need to get this fixed asap Also my hand brake has never worked properly. my rear right tire will brake but not lock up and the left side does nothing (the side im having troubles with) would this cause the hand brake to not work too?